Surface preparation is an important and often-overlooked step in a finishing process. Obtaining and maintaining adequate surface profile, chemistry, and cleanliness is necessary for quality coating.
From cabinet washers and ultrasonic diptanks to completely automated conveyorized multi-stage wash units, we are able to offer a cleaning solution that will work for your process.
Blasting and abrasive deburring are often necessary to provide an appropriate surface for a finishing process. We offer offline batch blasting and deburring equipment as well as the ability to integrate it into your process.
The cleaning, degreasing, and preparation of parts can greatly impact the economic efficiency of a process if the effluent is not handled intelligently. We offer solutions to filter, treat, and recycle wash water and various chemistries in order minimize material consumption, environmental impact, and disposal costs.
As customers demand better performance, consistency, and quality, they also demand better efficiency, flexibility, and economy out of their liquid application equipment.
Conventional, airless, airless air-assist, manual, automatic, HVLP, LVMP, etc. We partner with the best finishing companies in the industrial and automotive industries.
Selecting the correct pump for a given application can minimize energy usage and downtime due to maintenance and repair.
2K metering and dispense equipment to accommodate a wide variety of materials including metallics, acid catalysts, and water-based coatings.
Electrostatic equipment greatly reduces waste by applying an electrical charge during atomization significantly increasing transfer efficiency.
Hoses, gauges, regulators, liners, valves, connections, and many other essential finishing accessories.
Powder coating is a clean process that provides an attractive, durable, and high-quality finish. The coating is applied as a free-flowing dry powder and is cured by heat in order to create a hard finish.
Manual powder application equipment suitable for small batch coating all the way to inline continuous systems.
Powder applicators can be mounted on reciprocators or robots to provide precise and reliable finishes.
ICAFe sells the full line of IFS Coatings powder coatings. IFS produces coatings available in epoxies, hybrids, polyesters, TGIC’s, polyurethanes, fluoropolymers and acrylic hybrids. We warehouse many common powders in our Waukesha location in a climate-controlled room.
Adhesives can be dispensed in a continuous bead or as dots using automation equipment and manual hose-fed handgun system.
Virtually every product assembled requires bonding or sealing at some stage of the process. Graco offers manual and automated technologies for single-component and two-component bonding and sealing for a broad array of products, markets and end-usess.
ITW Dynatec designs, manufacturers and sells a full range of hot-melt adhesive application equipment for the Disposable Hygiene, Coating & Laminating, Packaging and Product Assembly industries worldwides.
ICAFe, Inc. is a leading provider of plating and aqueous systems and integration services to customers across the Midwest. Our capabilities allow for the design, engineering, and integration of robust systems.
Automation of finishing processes can save money, increase production rate, and minimize downtime.
Motion and control technologies can be found on and around everything that moves. SenecaFTI works with Parker Hannifin to provide precision-engineered solutions for a wide variety of industrial markets.
Dove Equipment has integrated robots into a variety of applications including paint spray, flame treatment, and loading/unloading.
ICAFe Companies partner with Global Finishing Solutions and other suppliers to design customized blast booths, wash booths, paint booths, and ovens.
A proper blast booth can be designed and engineered for your application—whatever your budget—from a fully-equipped blast room with recovery and dust collection—to a simple sweep-in recovery system.
Wash booths can be designed for manual wand and automatic spray and accommodate many conveyor types. They are often partnered with wastewater recycle systems to achieve zero liquid discharge.
Paint and powder booths provide a clean space for coating applications. It is necessary for a booth to provide adequate air flow, dust collection, and lighting to achieve a high quality paint job.
Continuous and batch process ovens with uniform air flow and temperature gradients ensure the coating cures evenly.
Air replacement systems replace contaminated air exhausted from industrial and commercial buildings or spray booths, with fresh, heated outdoor air, maintaining a constant leaving-air temperature regardless of the incoming, outdoor-air temperature.
ICAFe Companies warehouse parts, consumables, and coatings in several locations in the United States and Mexico.
ICAFe Companies have a well-stocked and cataloged parts department to get parts shipped to your location quickly. We have the ability to dropship straight from many of our manufacturers or ship from one of our eight locations in the United States and Mexico. Our team will get you the parts you need.
High quality industrial liquid coatings from Northern Coatings and National Coatings. Durable, dependable, and beautiful powder coatings from IFS Coatings and Polychem Coatings.
We carry and stock a wide selection of overspray filters and paint arrestors providing cutting edge filtration technology.
Electronic 2K and 3K proportioners offer predictable, accurate mixing along with significant material savings and analytics to improve processes. Material savings alone can often justify the purchase of a 2K unit versus hotpotting with very quick ROI’s. We are a distributor and integrator of Graco, Binks, Ransburg, and Kremlin plural component equipment.
Available in pump and metered versions for all spray technologies, ProMix 2KE makes plural component finishing EASY. Designed for multi-color, two component, in-booth applications.
Graco's two- and three-component proportioners offer precise and reliable electronic plural component proportioners for a broad range of solventborne, waterborne, and acid catalyzed materials. From entry level to upgraded applications, the ProMix 2KS and 3KS systems provide flexibility and increased efficiency.
The ProMix PD2K mixes the material close to the gun so the flush zone is significantly smaller. This allows customers to use less paint, spend less on disposal costs and allows for faster color changes. And because there is limited mixed material in the system, the ProMix PD2K is ideal for short pot life materials. It is also compatible with acid-based materials.
The RCS 2 (Ratio Control System) provides absolute on-ratio gear-driven mixing and metering control. Fast and reliable, the RCS 2 is the ideal choice for applications where short trigger times, quick response, and/or low flow are required. The RCS 2 features magnetically coupled metering pumps that eliminate shaft seal leaks.
GEMS™ is an advanced 2K mixing system using a simple design that combines an intuitive user touchscreen interface with data collection and analytics to improve finishing processes.
CYCLOMIX™ Expert can manage a total up to 24 components (bases, catalysts, flushing solvents). It can handle mono, bi or tri-component materials. The innovative dosing process - ultra fast injection valve - offers uneaqualled mixing quality and dosing accuracy. CYCLOMIX™ Expert is available in Airspray (HTI/HPA/HTV), AIRMIX® and AIRLESS versions (up to 200 bars) to meet all market needs, in manual or automatic spraying.
With CYCLOMIX™ Micro, the mixing process is mastered and guaranteed. All technical fluid and application characteristics are fully configurable. Once programmed, CYCLOMIX™ Micro will automatically handle all parameters. The programming is user-friendly and quick, with data in-putting by magnetic signal. Flushing and maintenance are very simple. In addition, the system can be controlled from inside the booth. CYCLOMIX™ Micro+ allows the flushing of the catalyst fluid passages especially for water-based materials. CYCLOMIX™ Micro+ PH is built to handle acid catalysts.
CYCLOMIX™ Multi can handle up to 7 different bases and 3 catalysts. Modular design CYCLOMIX™ Multi can be positioned in zone 1 or 2 (Directive ATEX). Programming and use are user-friendly by means of a large touch screen.